crankset Driveline single-blade

drivetrain

Aluminum crankset make Driveline (Taiwan), used for the 8 speed Dual
Drive version of the Cruiser / Explorer / Pioneer. Double aluminum
chain guards, aluminum chainring. Bottom bracket with square
connection.

Available in 170 mm and 155 mm cranklength, 42 t. and 52 t.

crankset Driveline triple

drivetrain

Aluminum triple crankset make Driveline (Taiwan), used for the 3 x 8
speed Derailleur version of the Cruiser / Explorer / Pioneer. Aluminum
chain guard, aluminum chainrings. Bottom bracket with square
connection.

Available in 170 mm and 155 mm crank length.

crankset Shimano Alfine

drivetrain

Shimano Alfine S500 crankset in "cap free" design, double chain guard, single replaceable aluminum chainring. Integrated bottom bracket, outboard bearings. Applied for the versions 3x9 Dual Drive, Alfine 11, Rohloff 14.

Available in 39 teeth and 45 teeth, crank length 170 mm, colour aluminium.

crankset Shimano Deore triple

drivetrain

Shimano FC-M543 SK triple crankset with 48/36/26 teeth and chainguard. Integrated bottom bracket with outboard bearings, replaceable chainrings. Material chain rings is steel for the small and middle ring, aluminum for the large ring.

For most cyclists and cycling holidays 48/36/26 is the best gear ratio for a 26 inch rear wheel. Used for the 3 x 9 Derailler versions of all Nazca models.

crankset Shimano race

drivetrain

The Sport versions of the models Fuego and Gaucho 28 use the latest Shimano road bike cranksets from the groupsets Tiagra, Shimano 105 and Ultegra. These beautiful triple cranks are not equipped with a chainguard.